Harbor Freight Tools Gear Driven Ring Roller Manuál stáhnout pdf (Strana 3)

Page 3SKU 36790

For technical questions, please call 1-800-444-3353.

Work Area

TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE YOUR

WORK AREA IS:

Free of damp, wet or rainy conditions.

Free of children (never let them handle tools or machinery).

Well-lit.

Clean and uncluttered.

Before Operating

Make sure all clamps, locks and bolts are tight, and that the Ring Roller is securely fastened to the

appropriate mounting surface.

Assembly

Your Ring Roller will require minor assembly prior to operation. It is important that you read the entire manual

to become familiar with the unit BEFORE you assemble and use the Ring Roller. Before assembling your

Ring Roller be sure that you have all parts described in the Parts List.

When assembling your Ring Roller, it will be helpful to refer to each of the operational Figures as well as to

the Parts List and Assembly Diagram on the last pages of this manual.

Assemble attachments based on the intended use of the Ring Roller only.

Mounting Surface: The mounting surface must be ﬂat, level and capable of supporting the weight of the Roller

combined with the materials to be rolled. Mount the

Ring Roller on a solid mounting surface that is

capable of supporting the weight of the Ring

Roller and the leverage force of the Handle

movement.

Step 1) Slide the Connector (#19) onto the

Drive Shaft II (#17) - see Figure 1.

Once the Connector (#19) is slid in

place on the Drive Shaft II (#17),

make certain that the holes in the

Connector (#19) line up with the

holes in the Drive Shaft II (#17).

Step 2) Slide the Handle (#15) into the hole

in the Connector (#19) and Drive

Shaft II (#17)

- see Figure 1.

Step 3) Secure the Connector (#19) to the

Drive Shaft II (#17) using the Taper

Pin (#20). Insert the

Handle (#15)

Connector (#19)

Insert Taper Pin (#20) here

Base (#25)

Mounting Hole

Figure 1

Handle (#15)

Connector (#19)

Insert Taper Pin (#20) here

Base (#25)

Mounting Hole

Figure 1

1 2 3 4 5 6 7

Komentáře k této Příručce

Žádné komentáře

Harbor Freight Tools Gear Driven Ring Roller Manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro ne Harbor Freight Tools Gear Driven Ring Roller