Harbor Freight Tools 2000 lbs. Capacity Foldable Engine Stand Manuál stáhnout pdf (Strana 3)

Page 3For technical questions, please call 1-800-444-3353.Item 69522

Assembly Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the

beginning of this document including all text under subheadings therein

before set up or use of this product.

1. Attach 3-1/2″ Casters (15) to the

straight, back section of the Base (8)

using Bolts (11), Spring Washers (10),

and Nuts (9). Insert Bolts from the

bottom, through the Casters first.

2. Attach 3″ Casters (16) to the angled,

front sections of the Base (8) using

Bolts (12), Spring Washers (10), and

Nuts (9). Insert Bolts from the top,

through the Base first.

Base (8)

3-1/2″

Caster

(15)

3-1/2″

Caster

(15)

3″ Caster

(16)

Bolt

(12)

Bolt (11)

Figure A: Attach Casters to Base

3. Attach a 3-1/2” Caster (15) to the end

of each Leg (17) using Bolts (11),

Spring Washers (10), and Nuts (9).

4. Place Legs (17) into slots in Base (8)

with the Casters (15) turned downward.

Use two Leg Lock Pins (13) to

secure each Leg. Secure each

Leg Lock Pin using an R-pin (14).

3-1/2″

Casters

(15)

Legs

(17)

Leg Lock

Pins (13)

Leg Lock

Pins (13)

Figure B: Attach Legs

Note: There are five M14 diameter Bolts.

The longer one, part 4, is used to attach the

top of the two Braces (5) to the Column (2).

5. Attach Column (2) to Base (8) using

Bolts (3), Washers (7), and Nuts (6).

Column (2)

Bolt (3)

Nut (6)

Washer

(7)

Figure C: Attach Column

1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře

Harbor Freight Tools 2000 lbs. Capacity Foldable Engine Stand Manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro ne Harbor Freight Tools 2000 lbs. Capacity Foldable Engine Stand