Harbor Freight Tools 6 in. Bench Grinder with Gooseneck Lamp Manuál stáhnout pdf (Strana 4)

Page 4 For technical questions, please call 1-888-866-5797. Item 37822 39797 39798

SAFETY OPERATION MAINTENANCESETUP

Grounding Instructions

TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT

GROUNDING WIRE CONNECTION READ AND FOLLOW THESE INSTRUCTIONS:

110-120 VAC Grounded Tools: Tools with Three Prong Plugs

1. In the event of a malfunction or breakdown,

grounding provides a path of least resistance

for electric current to reduce the risk of

electric shock. This tool is equipped with an

electric cord having an equipment-grounding

conductor and a grounding plug. The plug

must be plugged into a matching outlet that is

properly installed and grounded in accordance

with all local codes and ordinances.

2. Do not modify the plug provided – if it will

not fit the outlet, have the proper outlet

installed by a qualified electrician.

3. Improper connection of the equipment-grounding

conductor can result in a risk of electric shock.

The conductor with insulation having an outer

surface that is green with or without yellow

stripes is the equipment-grounding conductor.

If repair or replacement of the electric cord or

plug is necessary, do not connect the equipment-

grounding conductor to a live terminal.

4. Check with a qualified electrician or service

personnel if the grounding instructions are

not completely understood, or if in doubt as

to whether the tool is properly grounded.

5. Use only 3-wire extension cords that

have 3-prong grounding plugs and 3-pole

receptacles that accept the tool’s plug.

6. Repair or replace damaged or

worn cord immediately.

Grounding

125 VAC 3-Prong Plug and Outlet

(for up to 125 VAC and up to 15 A)

7. This tool is intended for use on a circuit that has

an outlet that looks like the one illustrated above in

125 VAC 3-Prong Plug and Outlet. The tool has

a grounding plug that looks like the plug illustrated

above in 125 VAC 3-Prong Plug and Outlet.

8. The outlet must be properly installed

and grounded in accordance with

all codes and ordinances.

9. Do not use an adapter to connect

this tool to a different outlet.

110-120 VAC Double Insulated Tools: Tools with Two Prong Plugs

Outlets for 2-Prong Plug

1. To reduce the risk of electric shock, double

insulated equipment has a polarized plug

(one blade is wider than the other). This

plug will fit in a polarized outlet only one

way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact

a qualified electrician to install the proper

outlet. Do not change the plug in any way.

2. Double insulated tools may be used in either of the

120 volt outlets shown in the preceding illustration.

(See Outlets for 2-Prong Plug.)

1 2 3 4 5 6 7 8 9 ... 15 16

Komentáře k této Příručce

Žádné komentáře

Harbor Freight Tools 6 in. Bench Grinder with Gooseneck Lamp Manuál Strana 4

Komentáře k této Příručce

Související produkty a manuály pro Elektrické nářadí Harbor Freight Tools 6 in. Bench Grinder with Gooseneck Lamp