Page 7For technical questions, please call 1-888-866-5797.Item 91033
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY AND DEATH FROM FIRE:
Have multiple ABC class fire extinguishers nearby.
Be familiar with fire extinguishing techniques before use of this item.
WARNING! Wear ANSI-approved safety goggles with
side shields and flame retardant gloves during use.
WARNING! Do not use thread seal tape, will weaken
the seal at the connections and can cause leaks.
1. Turn the Gas Control Knob and the gas
valve on the propane tank off.
2. Connect the Hose to the Handle by threading
the Handle Connector onto the Hose Connector.
Tighten securely with the Wrench.
3. Connect the Hose to the propane tank by threading
the Tank Connector firmly into the propane tank’s
connector. Tighten securely with the Wrench.
4. Turn the Gas Control Knob off. Open the gas
valve on the propane tank and check and
smell for gas leaks. Perform a bubble test:
a. Apply warm soapy water over every
joint, regulator, fitting, and anywhere
else there may be a possible leak.
b. Observe carefully to see if bubbles expand,
indicating a leak. A large leak can blow the
soapy solution away instead of forming bubbles.
c. If leaks are found, do not use the Torch
until the leaks have been stopped.
d. After testing, close the gas valve
on the propane tank.
5. Point the Burner in a safe direction, well away
from people and combustible materials.
6. Open the gas valve on the propane tank. Turn
the Gas Control Knob slightly counterclockwise.
7. Insert the lit end of a fireplace/barbecue lighter
through one of the slots on the side of the Burner.
8. Adjust the flame to its lowest setting while
maintaining a blue flame with an orange halo.
9. To achieve a working flame, depress the
Trigger, then apply flame to work surface.
10. Release the Trigger to return to low flame.
11. When finished:
a. Close the propane tank’s valve.
b. Allow remaining propane to flow out of the
Burner until the flame extinguishes itself.
c. Turn the Gas Control Knob completely clockwise.
d. Disconnect Hose from propane tank.
e. Let Torch cool completely on a
non‑flammable surface.
12. Store propane tank in an area where there is free
air circulation, at least 10 ft from building openings
(such as windows and doors), and at least 20 ft
from air intakes of air conditioning and ventilating
systems. Tightly install threaded valve plug (not
included) into disconnected propane tank.
13. Store the Torch in a safe, dry place,
covered to protect it from dust and dirt.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce